Description
- Fits 2014-2018, 19 Ltd/Legacy Chevy/GMC Silverado/Sierra, 2015-19 2500/3500HD 5′ 9″ Bed (69.3″)
- ULTIMATE SECURITY | The BAKFlip MX4 tonneau cover has durable aluminum panels that automatically latch as the cover is partially or fully closed, and is fully locked once your tailgate is closed
- STYLISH MATTE FINISH | Featuring matte-finished aluminum panels, protecting against marks, scratches and UV damage; as well as premium upgrades to the perimeter seals and hardware
- 100% BED ACCESS | Operate this cover closed, folded or flipped up, all without covering the 3rd brake light. Paired with a dual action tailgate seal for tailgate operation open or closed
- WE’VE GOT YOUR BAK | The MX4 truck bed cover is rated up to 400 lbs of evenly distributed weight and is easy to install. This hard fold has a 5-year, hassle-free warranty, with a US-based support team
badmonkey –
After 3 years the rubber hinges split and BakFlip won’t sell or replace them. Their customer service exact quote was “Buy a new one”! Once they split they leak water and are very difficult to fold up and unsafe to drive in the folded position. Considering the price it’s pathetic you can’t get more than 3 years, a cheap soft cover lasts longer.
chris dunnigan –
Easy install and good quality
Courtney –
I have only had this cover on my truck for about 3 days now. I’m giving it a 3-star review based on what has happened so far.
I received the item just fine. Other than the outside box being a little rough around the edges there was no damage to the main box or the cover itself. I went to install onto my truck and noticed I did not have the clamps that are required to mount the rails. I called customer service and they were able to ship me some. They didn’t ask for purchase information or any kind of confirmation which I thought was interesting.
Once I received the new parts (they sent me a whole bag of everything again). I started the install. I then noticed in the new bag I was missing some screws for the tie downs. At this point, I’m pretty sure missing parts is a common thing through this company. Luckily, I had two bags worth of parts to get the install completed.
Install was easy, I was shocked with how much I had to put together the cover but it wasn’t anything difficult at all. I did notice this morning that one of my pads to protect my back window has peeled off and laying in my truck bed. I don’t know if that will be a continuous problem?
I guess overall, for how much I paid for the cover I was expecting more, expecting better. If I had to do it over again, I don’t know if I would purchase again.
SteveFromBoston –
I had a revolver x2 model and it was the worst $1k I ever spent. It always froze to the tailgate and in the winter, it was like rolling a frozen carpet. I was so happy to replace it with this foldup model. Well built and seals nice at tailgate.
RD –
Fantastic bed cover. I bought this through amazon because it would be to me faster than through other various bed cover and truck accessory websites. It also ended up being cheaper through amazon. I received it in 48 hours and installed it in about an hour. I recommend watching the instructional video if this is your first install.
It went in easily and looks very clean, to include the drain plugs that you don’t even see. It seals very well. Not water tight but there is so little water that may work it’s way in that it slowly will make its way out of the bed through the normal indentions in the bed.
My only initial concern was that the cover I received had some spots on the edge seal(s) that were a little damaged. Well I contacted Bak and was immediately replied to. After providing the requested information and photos they manufactured and sent me an entire new cover right then and there. The only request was for me to destroy the damaged one and send a photo. This makes sense because I’m sure I could have easily sold even the one with the bad seals for several hundred. But I took the opportunity to see how it stood up to a ten pound sledgehammer.
It did exceptionally well. This thing is so durable that the hinges took at least 5 direct hits with the sledge and were barely warped. Obviously I was able to go through the panel but only with a strong hit.
Bottom line is this is a tough, mostly weatherproof, clean looking product. The only thing better than Bak’s product is their customer service.
(And I was not paid at all for this review nor was I asked to write it)
Amazon Customer –
Easy to install and no drilling. Had small ding in one corner but hidden so not a big deal.
Justin Vogt –
Installed in an hour. Quality is great. Ran through the car wash. Water was minimal under what I’d consider to be worst case scenario. Just make sure you get good seals when you install it. Easy to work. Looks great. The price had dropped between order, and delivery. Amazon customer service gave me a gift card for the difference even though it’s technically not their policy to price match. Great to feel like I can order expensive items from Amazon with the same protections I’d have at other retailers.
Melissa –
Have it on my 2016 Chevy 1500 Crew Cab. Fits great, looks great and functions great. It’s pretty much water proof- I ran it through a “jet” car wash and it barely leaked at all and it was just by the tailgate end. You probably just want to take care in where you place the sticky gasket at the cab end on your truck bed (if it applied for your model) and how far forward or back you set it in your truck bed. Only one complaint I have (and it’s just to be fully honest) is the screw knobs used to tighten down (once you’ve decided how far up or back you install it) can’t tighten unless your pressing down a bit on the flat end on top of the cover – this was just a tad annoying to alone on install… but I’m just being very particular. Overall I love this thing. Would buy it again in a heartbeat.
DonC –
Arrived in good condition as promised. Installation instructions aren’t difficult, and when done it fits and works well. Don’t forget to also buy weather-stripping to seal around the tailgate (not included).
Lisa I Craig –
Read the directions, then installed it after installing a Bed Rug. Easy and took less than 3 hours to install both total. Well worth it!
Went on a statewide road trip of Texas the next day, and have no complaints! Definitely makes having items in the bed and out of site, out of the weather, hassle free.
Diedrich G. –
Got it for mine 2017 silverado short bed. I like it works good. I’m getting one more for mine 2015 wit a 6.1/2 foot box quick open. Easy close looks good nice finish colour not so glassy more mate finish
Javier Franco –
Easy to install. I did it by myself. Anybody with home tools can do it. Love to protection it brings. No more worrying about leaving stuff in the back of the bed when on travel with kids for sports. Looks great. Love the flush fit. Enough water protection. No more putting crap in plastic bags. I even got around 1.5mpg more on my 2017 GMC Sierra 5.3L. I don’t have a lead foot. If driving 45-65mpg you’ll see it. Anymore than that you won’t see much.