Description
- Fits 2019 – 2024 Dodge Ram 1500 w/ or w/out Multi-Function (Split) Tailgate 6′ 4″ Bed (76.3″)
- Made in the USA with Global Materials
- UNBELIEVABLY FUNCTIONAL | TruXport is designed to be exceptionally easy to use: Simply unlock the tailgate latches & roll up your cover. TruXport is engineered with a heavy-duty 1.5” frame, and equipped with high quality leather-embossed vinyl
- STAND GUARD AGAINST WEATHER | Keep your cargo dry and secure during all weather situations. Pre-set tarp tension keeps cover tight and leaves water out. TruXport’s support bows allow it to withstand several inches of snow when closed.
- NO DRILL INSTALLATION | Fully install this roll-up truck bed cover in under 30 minutes! Easily clamp the rails onto your truck bed, attach the cover, roll and go. No drilling or special tools necessary
Chad56650 –
Avec le vidéo, ca aide vraiment pour l’installation, j’avais acheté la même en 2019 pour mon autre pick up, seul bémol la toile a plus que doublée de prix…
Ken in NC –
I always seem to come to this cover. They fit good with a quick easy installation. The vinyl is tough and lasts a long time.
Dani H. –
Product arrived quickly and packaged well. All parts were there. I budgeted about 2 hours in the cooler part of the morning (NC) to get the job done. I was finished in about 45 minutes, but had to tweak it several times to make sure everything was centered. Overall time was about 90 minutes to install and secure it. The latch mechanism was not 100% clear to me at first how to secure the top, but after a few minutes, figured it out. I also read through the troubleshooting section and realized I could pull the entire top slightly to one side at the head rail which fixed my centering problem. Well made. I may have more details one I have mileage on it. Has 0 miles on it right now. Looks good though. Photo was taken before full tweaking was complete. 2025 Ram 1500 Laramie. First time installer but relatively good with tools.
Chad56650 –
Easy install although instructions could be a bit better. Looks great on my black Ram truck. I wanted the canvas type material because it’s not glossy like most roll up covers. I also like the very low profile fit. There was just a tiny bit of water leakage after a week of rain and truck outside. I’m pleased with that.
All in all it’s a great tonneau cover.
Art Vandelay –
I am absolutely thrilled with my TruXedo Pro X15 Soft Roll Up Truck Bed Tonneau Cover for my 2023 Ram 1500! This cover has exceeded my expectations in every way possible. The sleek, low-profile design enhances the truck’s aesthetics, giving it a modern and stylish look.
Installation was a breeze, thanks to the user-friendly instructions and the well-engineered components. The cover fits my Ram 1500 like a glove, and the quality of materials used is evident. I appreciate how it rolls up effortlessly, providing quick access to my truck bed when needed.
Weather resistance is top-notch; it has kept my cargo completely dry through rain and storms. The durability of the Pro X15 is commendable—I can tell it’s built to last. Additionally, the secure and tight fit doesn’t compromise fuel efficiency.
Overall, the TruXedo Pro X15 is a fantastic investment for anyone looking to protect their truck bed with style. I highly recommend it for its quality craftsmanship, ease of use, and the added aesthetic touch it brings to my 2023 Ram 1500. Worth every penny!
Joe handyman. –
Product is well made. After 4 years in MN climate it still works well and repels water. There is only one issue with this system. There are 2 seals you have to glue in. They are by the top of the tailgate and you glue them to the ram box . This seals out water intrusion between the tailgate and the rambox. The seals worked great until the glue failed. About 12 months to 15 months before glue failure. So search for a better adhesive. It will be worth the effort. It was easy to install. Just watch a YouTube on. It. Or follow the instructions. I would buy this product for my next ram box truck.
James A –
Works just as advertised. I like the low profile look and the heavy duty velcro.
Joe handyman. –
I bought one of these for my wife’s new 2020 Ram Laramie. I have a Truxedo Lo-Pro on my 2017 Ram and was looking for something similar for her truck. The Lo-Pro doesn’t fit the 20 Ram but found the Deuce. I sure wish I had seen this when I was looking for a cover for my truck!! This thing is great! Installation was straightforward and with a couple extra hands (wife’s) we knocked it out in about 3 hours start to finish…but we took our time and adjusted the clamps several time to get the position just right. Take your time… use spring clamps to get it in just the right position before bolting it all up. The fact that this cover can be opened from the front is the best thing about it. Looks sharp and is tight. Doesn’t sit up too high and is only about 1/4″ higher than my Lo-Pro. It doesn’t cover the bed rails, no blowing around while driving and no noise.
We watched a couple videos of the installation from Truxedo before tackling this and it was worth the extra time. Although I have installed Tonneau covers before, it never hurts to see what might be a bit different with each model or type.
We also purchased the Truxedo Expedition Luggage bag for the back. Again, great product and well made. You cant beat Made in USA!!!! I’ll leave a review for that product on their page.
James A –
Excelente
Dani H. –
I had an older model on another truck. This is definitely an upgrade for my 2021 RAM 1500. The install had me guessing at a few things, but I eventually got it. Make sure you take time to adjust the side rails so your tailgate closes properly. The feel of closing your tailgate should be almost the same without the cover on. If the rails are sticking out too far, the gate will have too much pressure on it and wear out the latch. And if you have an automatic gate opener, it will put extra stress on that system too.
I love the cover material! The flat black color really blends well with the other plastic pieces on my truck. The canvas material feels like it will last for years. As for cleaning, I got some crud baked on it then got a hard nylon brush with soapy water to scrub it off. No problem! The latch system is great (once adjusted). I knocked off 1 star because it’s advertised to be able to keep the cover fully shut and be able to open/close the gate. Well, the rubber weather stripping on the cover hangs down a bit when you open the gate, so when I close it, it catches and folds the rubber down instead of keeping it on top of the gate. So I just unlatch the cover real quick, close the gate, then snap the cover shut. Not a big deal, but not as advertised. Notice the nice water tight seal on the gate in the photos. Water pools up behind the weather stripping. As for the corners, water will still enter your bed there. Maybe some diy fix in the future, but this isnt advertised as 100% water proof so i knew what i was getting into. So far I love it!
Ken in NC –
If you think IKEA has hard-to-follow instructions, then TruXedo takes the gold medal. The instructions were most likely written by someone who has done a 100 installs. Diagrams are impossible to follow. Plan on 5-6 hrs to trouble shoot and install. And its a 2-person job to shave 1-2 hrs off install. The most important part of the install is locking down the cover just behind the cab, so it can’t fly away and become a serious road hazard. The aluminum rails are impossible to get level to the bed (too thin and they deform under weight of the cover), especially when its in the rolled up position, to lock it in, So you have to McGyver it by using weights at the cab end, and loosening the hex screws for better grab, and partially unrolling the cover by a 1/3, and crawl underneath. I also adjusted the depth of locking sliders at the cab end to be extra secure. None of those hints are in the instructions! A video would be nice. Again, have a first timer write your install instructions.
And it takes 2 people to use it. The slats are a very, very tight fit between the rails, so you need to unwind both sides equally at same time, so the locking slots can lock under the rail at the back end. If you unroll on one side only, it won’t unroll exactly square, and then won’t lock at the back gate (either the left or the right side slats will ride up over the rail). If you unroll yourself, you need to do about 1/3 each side, swap sides, and repeat. And them its and extra fist pump to get them spring tabs to click into the rails and lock.
It sure looks nice though, and seems pretty secure for preventing people getting into the box. And it seems hardy enough to support a good load of snow on it. More aerodynamic for better mileage? Perhaps, but it weighs about 85 lbs, so likely a wash at best, having to lug the extra weight around all the time.
For $1,600 plus tax, the value isn’t there for something that doesn’t work anywhere near as simple as a trunk lid. I wouldn’t repeat the purchase. I would go soft cover for 1/5 the price, or tri-fold installed by a dealer. This install is likely to remain in place most of the time with very few times rolling it up. And although you can remove the cover entirely, its unlikely I’ll ever do that with the hassle of locking it in place again. It will be rolled up only when I need access to the box.
2 stars, that could have been 3 if they had better instructions. ( I was really close to returning it, it was that frustrating).